相变光盘的介质优选及理论计算

 本文着重论述相变光盘的存储机理、介质优选、理论计算及光存储最新进展。     

Structural health management technologies for inflatable/deployable structures: Integrating sensing and self-healing

Inflatable/deployable structures are under consideration as habitats for future Lunar surface science operations. The use of non-traditional structural materials combined with the need to maintain a safe working environment for extended periods in a harsh environment has led to the consideration of an integrated structural health management system for future habitats, to ensure their integrity. This article describes recent efforts to develop prototype sensing technologies and new self-healing materials that address the unique requirements of habitats comprised mainly of soft goods. A new approach to detecting impact damage is discussed, using addressable flexible capacitive sensing elements and thin film electronics in a matrixed array. Also, the use of passive wireless sensor tags for distributed sensing is discussed, wherein the need for on-board power through batteries or hardwired interconnects is eliminated. Finally, the development of a novel, microencapuslated self-healing elastomer with applications for inflatable/deployable habitats is reviewed.     

Robust model predictive control for satellite formation keeping with eccentricity/inclination vector separation

This study presents model predictive formation control based on an eccentricity/inclination vector separation strategy. Alternative collision avoidance can be accomplished by using eccentricity/inclination vectors and adding a simple goal function term for optimization process. Real-time control is also achievable with model predictive controller based on convex formulation. Constraint-tightening approach is address as well improve robustness of the controller, and simulation results are presented to verify performance enhancement for the proposed approach.     

Gravitational wave detection on the Moon and the moons of Mars

The Moon and the moons of Mars should be extremely quiet seismically and could therefore become sensitive gravitational wave detectors, if instrumented properly. Highly sensitive displacement sensors could be deployed on these planetary bodies to monitor the motion induced by gravitational waves. A superconducting displacement sensor with a 10-kg test mass cooled to 2 K will have an intrinsic instrument noise of 10⁻¹⁶ m Hz^−1/2. These sensors could be tuned to the lowest two quadrupole modes of the body or operated as a wideband detector below its fundamental mode. An interesting frequency range is 0.1–1 Hz, which will be missed by both the ground detectors on the Earth and LISA and would be the best window for searching for stochastic background gravitational waves. Phobos and Deimos have their lowest quadrupole modes at 0.2–0.3 Hz and could offer a sensitivity h_min ? 10⁻²² Hz^−1/2 within their resonance peaks, which is within two orders of magnitude from the goal of the Big Bang Observer (BBO). The lunar and Martian moon detectors would detect many interesting foreground sources in a new frequency window and could serve as a valuable precursor for BBO.     

Full control of a PWM DC-AC converter for AC voltage regulation

The design and implement action of a DSP-based fully digital-controlled single-phase pulsewidth modulated (PWM) dc-ac converter for ac voltage regulation is described. The proposed multiloop digital controller (MDC) consists of a current controller, a voltage controller, and a feedforward controller. This MDC was realized using a single-chip digital signal processor (DSP). The PWM gating signals are determined at every sampling instant by the proposed multiloop digital control scheme using a set of detected feedback signals. A software current control; scheme has been developed to achieve fast current control of the PWM inverter and decouple the inductor of the output filter. Experimental results have been given to verify the proposed digital control scheme. The constructed DSP-based PWM dc-ac converter system can achieve fast dynamic response and with low total harmonic distortion (THD) for rectifier type of loads     

Comparative study of the influence of natural convection on directional solidification of Al–3.5 wt% Ni and Al–7 wt% Si alloys

We present numerical simulations of thermosolutal convection for directional solidification of Al–3.5 wt% Ni and Al–7 wt% Si. Numerical results predict that fragmentation of dendrite arms resulting from dissolution could be favored in Al–7 wt% Si, but not in Al–3.5 wt% Ni. Corresponding experiments are in qualitative agreement with the numerical predictions. Distinguishing the two fragmentation mechanisms, namely dissolution and remelting, is critical during experiments on earth, when fluid flow is dominant.     

Modeling and parameter optimization of agile beam radar tracking

In the work presented here, we address parameter optimization for agile beam radar tracking to minimize the radar resources that are required to maintain a target under track. The parameters to be optimized include the track-revisit interval as well as the sequence of pairs of target signal strengths and detection thresholds associated with successive illumination attempts in each track-revisit. The effects of false alarms and clutter interference are taken into account in the modeling of target detection and in the characterization of tracking performance. Based on the detection model and tracker characterization, the parameter optimization problem is formulated. Typical examples of the optimization problem are numerically solved. The optimal solution gives an off-line scheduling of the parameter set. It also provides insight into the selection of a near-optimal parameter set that is appropriate for real-time implementation.     

Hardware-In-the-Loop Simulations of spacecraft attitude synchronization using the State-Dependent Riccati Equation technique

A nonlinear control technique pertaining to attitude synchronization problems is presented for formation flying spacecraft by utilizing the State-Dependent Riccati Equation (SDRE) technique. An attitude controller consisting of relative control and absolute control is designed using a reaction wheel assembly for regulator and tracking problems. To achieve effective relative control, the selective state-dependent connectivity is also adopted. The global asymptotic stability of the controller is confirmed using the Lyapunov theorem and is verified by Monte-Carlo simulations. An air-bearing-based Hardware-In-the-Loop Simulator (HILS) is also developed to validate the proposed control laws in real-time environments. The SDRE controller is discretized for implementation of a real-time processor in the HILS. The pointing errors are about 0.2° in the numerical simulations and about 1° in the HILS simulations, and experimental simulations confirm the effectiveness of the control algorithm for attitude synchronization in a spacecraft formation flying mission. Consequently, experiments using the HILS in a real-time environment can appropriately perform spacecraft attitude synchronization algorithms for formation flying spacecraft.     

Aerodynamic design optimization of helicopter rotor blades including airfoil shape for hover performance

This study proposes a process to obtain an optimal helicopter rotor blade shape for aerodynamic performance in hover flight. A new geometry representation algorithm which uses the class function/shape function transformation (CST) is employed to generate airfoil coordinates. With this approach, airfoil shape is considered in terms of design variables. The optimization process is constructed by integrating several programs developed by author. The design variables include twist, taper ratio, point of taper initiation, blade root chord, and coefficients of the airfoil distribution function. Aerodynamic constraints consist of limits on power available in hover and forward flight. The trim condition must be attainable. This paper considers rotor blade configuration for the hover flight condition only, so that the required power in hover is chosen as the objective function of the optimization problem. Sensitivity analysis of each design variable shows that airfoil shape has an important role in rotor performance. The optimum rotor blade reduces the required hover power by 7.4% and increases the figure of merit by 6.5%, which is a good improvement for rotor blade design.     

Signatures of the Sudden Stratospheric Warming events of January–February 2008 in Seoul,S. Korea

The period January–February 2008 was characterized by four Sudden Stratospheric Warmings (SSWs) in the Northern Hemisphere, of which the last warming, at the end of February 2008, was a major warming. A significant decrease in mesospheric water vapour (H₂O) of more than 2 ppmv (∼40%) was observed by the ground-based microwave (GBMW) radiometer in Seoul, S. Korea [37.3°N, 126.3°E] during the major SSW. A comparison with ground-based mesospheric H₂O observations from the mid-latitude station in Bern [46.9°N, 7°E] revealed an anticorrelation in the mesospheric H₂O data during the major SSW. In addition, prior to the major warming, strong periodic fluctuations were recorded in the Aura MLS vertical temperature distribution between 15 and 0.05 hPa at Seoul. The mesospheric temperature oscillation was found to have a period of ∼10–14 days with a persistency of 3–4 cycles.